Description This card reader by Delock can be installed into a 3.5″ bay of a PC and will be connected to an internal USB 3.0 pin header male port. It has a 5 slot card reader and enables the connection of up to four USB devices, which the USB 3.0 hub provides. Specification • Connector:
external:
5 x Card Reader slots
4 x USB 3.0 Type-A female
internal:
1 x 19 pin USB 3.0 pin header female
1 x 4 pin power connector
• Chipset: GL3522 (Hub), GL3223 (Card Reader)
• Metal housing for installation into a 3.5″ bay
• Data transfer rate up to 5 Gb/s
• 4 port USB 3.0 hub supports USB Battery Charging BC 1.2 specification
• LED indicator for the card reader for power (green) and access (red)
• Cable data:
1 x 19 pin USB 3.0 pin header female cable ca. 53 cm (incl. connector)
1 x 4 pin power cable ca. 29 cm (incl. connector)
• Hot Swap, Plug & Play
• Supports following memory cards: Slot 1
Compact Flash / Micro Drive | CF I, CF II, CF Extreme, CF Extreme III,
CF Extreme IV, Micro Drive | Slot 2
Memory Stick | MS, High Speed Memory Stick (HS MS), MS PRO,
MS PRO-HG, Memory Stick XC, MS Duo,
MS PRO Duo, MS PRO Duo Mark2, MS PRO-HG,
MS PRO-HG Duo, MS PRO-HG Duo HX,
MS Micro*, MS PRO Micro*, MS-HG Micro*,
MS XC-HG Micro*, M2* | Slot 3
xD | xD, xD type M, xD type H | Slot 4
Micro SD | microSD, Micro SDHC, Micro SDHC Ultra, T-Flash | Slot 5
Secure Digital / Multi Media Card | SD, SD Ultra, SD High Capacity (SDHC), SD Ultra, SDHC Ultra, SDXC, SDXC Ultra, MMC, miniSD, MMCmobile, RS-MMC | *Adapter is required System requirements • Linux Kernel 3.10 or above
• Windows 7/7-64/8.1/8.1-64/10/10-64
• PC with one free 3.5″ bay
• Motherboard with a free 19 pin USB 3.0 pin header male
• Power supply with a free 4 pin power connector Package content • 3.5″ card reader with connection cable
• Screws
• User manual Package • Retail Box |